Speakers for your Rock Garden | Omni-Directional Speakers | Speakers for your Patio | Wall Speakers | Ceiling Speakers | Switchboxes, Speaker Wire, Volume Controls
 

Outdoor Speakers
Rock Speakers
Omni Speakers
Patio Speakers
----------------
Indoor Speakers
Ceiling Speakers
In Wall Speakers
Speaker Bars
----------------
Backyard Theater
----------------
Speaker Switchboxes
Volume Controls
Speaker Cable/Wire
----------------
Installation
----------------
Do It Yourself
Speaker Building
Customer Photos
Subwoofer Drivers
----------------
Volume Discounts
----------------
About Us
----------------
Privacy Statement
----------------
Contact Us

In-Wall Speakers - FREE Shipping

"Free shipping on Ceiling and Wall speakers at ZillaAudio makes these products even greater values!" David, Great Neck, New York

-- Dayton Wall Speakers

Dayton US520W 5-1/4" 2-Way In-Wall Speaker Pair

The US520W's uses a high resolution Kevlar mid/woofer and a pivoting silk dome tweeter. An audiophile-tweaked crossover integrates these two drivers together in seamless fashion. Kitchen, sunroom, bath, and rear surround sound installations benefit from the compact size. Specifications: *Power handling: 40 watts RMS/80 watts max *Impedance: 8 ohms *Frequency response: 50-20,000 Hz *SPL: 91 dB 1W/1m *Dimensions: 9-1/4" H x 6-5/8" W x 2-3/8" D *Cutout size: 8-1/4" H x 5-9/16" W *Mfg. #US520W *Sold in pairs.

Dayton US620W 6-1/2" 2-Way In-Wall Speaker Pair

The US620W delivers solid, accurate bass while providing smooth high frequency response—and it's perfect for small-to-medium home theater or whole house audio applications. The 6-1/2" Kevlar® cone delivers dynamic bass/mid response, while the integrated phase plug reduces phase distortion. The 1" pivoting dome tweeter reproduces crisp, clean highs and is adjustable for improved stereo imaging. The US620W in-wall speakers put maximum sound where you need it, for minimum money. Specifications: *Power handling: 50 watts RMS/100 watts max *Impedance: 8 ohms *Frequency response: 45-20,000 Hz *Sensitivity: 91 dB 1W/1m *IR knockout for infrared receiver *Dimensions: 12-1/8" H x 8-5/8" W x 3-1/8" D *Cutout size: 10-7/8" H x 7-3/8" W *Mfg. #US620W *Sold in pairs.

Dayton US820W 8" 2-Way In-Wall Speaker Pair

Dayton Ultra Series 8" two-way in-wall combines fidelity, reliability, and great value. A state of the art Kevlar® cone gives the US820W the ability to reproduce more accurate bass than paper cone woofers, thanks to its stiff yet light composition; an integrated phase plug ensures reduced phase distortion. The 1" silk dome tweeter reproduces highs with amazing accuracy and pivots for improved stereo imaging. An IR knockout offers discreet integration of infrared control systems and accepts standard "tube" style IR receivers. Specifications: *Woofer: 8” Kevlar cone *Tweeter: 1” pivoting silk dome *Power handling: 60 watts RMS/120 watts max *Impedance: 8 ohms *Frequency response: 35-20,000 Hz *Sensitivity: 91 dB 1W/1m *IR knockout for infrared receiver *Dimensions: 14-1/2" H x 10-1/2" W x 3-1/4" D *Cutout size: 13" H x 9" W *Mfg. #US820W *Sold in pairs.

Dayton US830W 8" 3-Way In-Wall Speaker Pair

Dayton Ultra Series US830W three way in-wall speaker sounds like a spectacular floor-standing system. The speaker's 8" woven Kevlar® cone woofer delivers great bass; an integrated phase plug allowing for greater detail with less distortion. A 1-1/2" silk dome midrange and ferrofluid cooled 1" silk dome tweeter provide crisp, clear mids and highs. Both midrange and tweeter pivot to provide the perfect sound stage imaging, and a 12 dB/octave crossover network precisely integrates the bass, mids, and highs. An IR knockout offers discreet integration of infrared control systems and accepts standard "tube" style IR receivers. Specifications: *Power handling: 60 watts RMS/120 watts max *Impedance: 8 ohms *Frequency response: 35-20,000 Hz *Sensitivity: 91 dB 1W/1m *IR knockout for infrared receiver *Dimensions: 14-1/2" H x 10-1/2" W x 3-1/4" D *Cutout size: 13" H x 9" W *Mfg. #US830W *Sold in pairs.

Dayton US520MTM 5-1/4" Center Channel In-Wall Speaker

The US520MTM is designed as an all-purpose speaker. This makes it the perfect speaker to complete your home theater system. Install this speaker either vertically or horizontally (fits between 16" studs) using it in front, center channel, or surround applications. Utilizing two shielded Kevlar® woofers; the US520MTM has warm mids and tight, accurate bass. Integrated phase plugs allow for greater detail without distortion. The 1" silk dome tweeter reproduces clear highs that rival esoteric loudspeakers. The pivoting tweeter can be adjusted to provide the ideal sonic imaging. An IR knockout offers discrete integration of infrared control systems and accepts standard "tube" style IR receivers. Specifications: *Power handling: 50 watts RMS/100 watts max *Impedance: 8 ohms *Frequency response: 45-20,000 Hz *SPL: 91 dB 1W/1m *IR knockout for infrared receiver *Dimensions: 15-3/4" L x 9" W x 3-1/2" D *Cutout size: 14-7/16" L x 7-7/8" W *Minimum horizontal spacing between studs: 13-15/16" *Sold individually.

Dayton CS620W 6-1/2" 2-Way In-Wall Speaker Pair

A very popular in-wall speaker. Big enough to produce great home theater sound, and still fit in everyone's budget. Put a pair in every room of your house. The 6-1/2" polypropylene woofer and 1" mylar dome tweeter were specially designed to produce a warm, rich sound. The crossover network utilizes mylar capacitors for crisp clean highs. A three piece bracket design make installation in new or existing walls a snap. Specifications: *Power handling: 60 watts RMS/85 watts max *8 ohm impedance *3 component L/C crossover network *Frequency response: 50-20,000 Hz *Sensitivity: 89 dB 1W/1m *Overall dimensions: 8-1/2" W x 12" L x 3-1/2" D *Hole size: 7-1/4" x 10-3/4" *Fits into standard 2" x 4" wall *Sold in pairs.

Dayton ES65W 6-1/2" 2-Way In-Wall Speaker Pair

Dayton Elite Series in-walls offer quality components and design by industry "golden ears" combine to make these in-walls the perfect choice for any surround sound application. The multi-polymer coned woofers deliver deep resounding lows while the 1" swiveling tweeters directionally spread HF where you need it. Single unit creme white paintable frames with screw-foot pull down allow for a quick 5 minute installation. Specifications: *Power handling: 40 watts RMS/80 watts max *Impedance: 8 ohms *Frequency response: 55-20,000 Hz *Dimensions: 12” H x 8-1/2” W *Cutout: 10-1/4” H x 7-1/4” *Mfg. #ES65W *Sold in pairs.

Dayton ES80W 8" 2-Way In-Wall Speaker Pair

Dayton Elite Series in-walls offer quality components and design by industry "golden ears" combine to make these in-walls the perfect choice for any surround sound application. The multi-polymer coned woofers deliver deep resounding lows while the 1" swiveling tweeters directionally spread HF where you need it. Single unit creme white paintable frames with screw-foot pull down allow for a quick 5 minute installation. Specifications: *Power handling: 60 watts RMS/125 watts max *Impedance: 8 ohms *Frequency response: 48-20,000 Hz *Dimensions: 14-1/8" H x 10" W *Cutout: 12-3/4" W x 8-11/16" W * Mfg. #ES80W *Sold in pairs.

Allison Acoustics AL6IW 6-1/2" 2-Way In-Wall Speaker - Pair
Legendary Allison Acoustics performance and design! Whether you’re looking for a small to mid-sized home theater speaker or a quality speaker for distributing sound throughout the house, the Allison Acoustics AL6IW is a perfect fit. The polymer cone woofers with rubber surrounds are teamed up with silk dome tweeters supported by precision crossovers to achieve exemplary performance. A 1” pivoting silk dome tweeter allows you to customize your high frequencies, placing it exactly where the listener needs it. With the easy DIY installation you’ll have amazingly smooth Allison performance driven sound in minutes. Paintable grills to match any decor. Perfect match with Allison Acoustics Ceiling Speakers or Allison Acoustics Flat Panel LCD TV Speakers. Specifications: *Power handling: 10 watts RMS/150 watts max *Impedance: 8 ohms *Frequency response: 35-22,000 Hz *Dimensions: 12” H x 8-1/2” W *Cutout: 10-1/4” H x 7-1/4” *Sold in pairs.

Allison Acoustics AL8IW 8" 2-Way In-Wall Speaker - Pair
Legendary Allison Acoustics performance and design for accurate audio reproduction! Each speaker from Allison Acoustics is a precise combination of quality components and construction. The AL8IW 8” two-way in-wall performs at a price and quality level that’s sure to please. Performance-hall ambience results from the 8”co-polymer cone woofer which has been mated with a pivoting 1” silk dome tweeter. Allison precision crossovers use audiophile-grade components for years of use and a lifetime of sound. Paintable grills to match any decor. Complete with an easy DIY installation. Perfect match with Allison Acoustics Ceiling Speakers or Allison Acoustics Flat Panel LCD TV Speakers. Specifications: *8” co-polymer woofer *1” pivoting silk dome tweeter *Power handling: 10 watts RMS/175 watts max *Impedance: 8 ohms *Frequency response: 32-22,000 Hz *Dimensions: 14-1/8” H x 10” W *Cutout: 12-3/4” W x 8-11/16” W *Sold in pairs.

-- Goldwood In-Wall Speakers

Goldwood GB-530 Select 5-1/4" 2-Way In-Wall Speaker - Pair

The Goldwood GB-530 in-wall speaker is an affordable, easy to install speaker for smaller rooms, home theaters, or offices. A 5-1/4" polypropylene woofer delivers rich mids and solid bass. The pivoting 1"soft dome tweeter reproduces clean highs by way of a 12dB crossover that utilizes a Mylar capacitor. Perfect match with Goldwood Ceiling Speakers. Specifications: *5-1/4" woven polypropylene driver *1" pivoting soft dome tweeter *Impedance: 8 ohm *2nd order 12 dB/octave crossover *Frequency response: 50-20,000 Hz *Power handling capability: 45 watts RMS/75 watts max *Sensitivity: 88dB 1W/1m *Dimensions: 7-1/2" W x 11" L x 2-1/2" D *Hole size: 6-1/4" W x 9-1/2" L *Mfg. # GB-530 *Sold in pairs.

Goldwood GB-630 Select 6-1/2" 2-Way In-Wall Speaker - Pair

The Goldwood GB-630 in-wall speaker is designed to produce home theater sound at an affordable price. A 6-1/2" polypropylene woofer delivers solid bass and warm mids. A pivoting 1" soft dome tweeter produces detailed highs by way of a 12dB crossover that utilizes a Mylar capacitor. Perfect match with Goldwood Ceiling Speakers. Specifications: *6-1/2" polypropylene driver *1" pivoting soft dome tweeter *Impedance: 8 ohm *2nd order 12 dB/octave crossover *Frequency response: 40-20,000 Hz *Power handling capability: 50 watts RMS/80 watts max *Sensitivity: 88dB 1W/1m *Dimensions:8-5/8" W x 12" L x 3" D *Hole size: 7-3/8" W x 10-3/4" L *Mfg. # GB-630 *Sold in pairs.

Goldwood GB-830 Select 8" 2-Way In-Wall Speaker - Pair

The Goldwood GB-830 in-wall speaker is the flagship of the Select series line up. A large 8" polypropylene woofer delivers deep bass and warm mids. A pivoting 1" soft dome tweeter delivers highs with amazing imaging. The 12 dB crossover uses a Mylar capacitor for clean, crisp highs. Perfect match with Goldwood Ceiling Speakers. Specifications: *8" polypropylene driver *1" pivoting soft dome tweeter *Impedance: 8 ohm *2nd order 12 dB/octave crossover *Frequency response: 40-20,000 Hz *Power handling capability: 60 watts RMS/90 watts max *Sensitivity: 89dB 1W/1m *Dimensions: 10" W x 14" L x 3-3/8" D *Hole size: 8-3/4" W x 12-3/4 L" *Mfg. # GB-830 *Sold in pairs.

Goldwood GB-LCR5 Concert 5-1/4" MTM In-Wall Speaker

Designed to be mounted vertically as a surround sound speaker or horizontally as a center channel speaker, the Goldwood GB-LCR5 features two woven Kevlar woofers with rubber surrounds to deliver warm mids and stunning bass. A pivoting 1" silk and Titanium dome tweeter, using a 12dB crossover with a Mylar capacitor, reproduces amazing clarity and superb highs. A +3/-3 dB level adjustment to the tweeter allows it to seamlessly blend with other speakers. Specifications: *2 5-1/4"" woven Kevlar drivers *1" pivoting dome tweeter *Impedance: 8 ohm *2nd order 12 dB/octave crossover *Frequency response: 50-20,000 Hz *Power handling capability: 50 watts RMS/100 watts max *Sensitivity: 91dB 1W/1m *IR knockout *Gold plated spring terminals *Dimensions: 8-5/8" W x 17-5/8" L x 3-1/4" D *Hole size: 7-1/4" W x 16-1/4" L *Mfg. # GB-LCR5 *Sold in individually.

Goldwood GB-1000 10" In-Wall Subwoofer

The GB-1000 in-wall subwoofer, by Goldwood, is the perfect solution for integrating bass into a room without taking up space. With a frequency response that extends down to 22 Hz, the ultra-stiff, 10" non-pressed paper cone woofer with rubber surround provides the Earth-shaking dinosaur steps that you've felt at the movie theater. A streamlined installation depth of 3.5" ensures installation will be a breeze. Also included is a 2nd-order low pass crossover that will allow you to place this subwoofer just about anywhere in the room without localization effects. Hardware, installation manual, templates, and a paintable grill are all included. Sold individually. White in color. Specifications: *Power handling: 60 watts RMS/100 watts max *Impedance: 8 ohms *Frequency response: 20-200 Hz *Sensitivity: 89 dB 1W/1m *Dimensions: 12" H x 12" W x 3-1/2" D *Cutout: 10-5/8"W x 10-5/8" H.

ZillaAudio.com | Rock Speakers | Garden Speakers | Patio Speakers | In-Wall Speakers | Ceiling Speakers and more!